Menu
BACK
BACK
A 65° Shore Nitrile (NBR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Nitrile and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 70 Shore Natural Rubber(NR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Natural Rubber and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 65° Shore Neoprene (CR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Neoprene and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
We stock this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm thick.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
MacNetic is a Premium Grade Blue Nitrile Rubber Sheet Metal Detectable by electromagnetic sensors and magnetic detectors. Coloured Blue for industry compliance within the Food, Pharmaceutical, Chemical and Cosmetics industries.
Independently certified EU1935:2004 compliant for contact with foodstuffs, Nitrosamine Free, Bisphenol A (BPA) Free and Animal Derived Ingredients Free (ADI).
Suitable for applications including gaskets, seals, joints, skirts and curtains within safety critical industries.
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 6mm and 5 Metres Long for 8mm and above.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
European Union Manufactured Food Safe Grade Natural Rubber (NR) Rubber Sheet conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.260
European Union Manufactured 60° Shore EPDM Rubber Sheet with full traceability and test data available.
A 40° Shore Tan "Shotblast" Natural Rubber Sheet with good Abrasion Resistance. This particular grade has many uses, but was originally designed for use as Shotblast Curtains. Can sometimes be referred to as Tan Para or Paragum Rubber.
0853 is a Neoprene(CR) Rubber Sheeting essentially conforming to National Coal Board (NCB) 853 specification. Specifically formulated for use in applications requiring Anti-Static Properties as well as Flame Retardant eg. Underground Applications such as Mining as well as a number of Transport Applications. Conforms to ISO 340 MSHA CFR Pt 18 with a 60 Seconds Maximum Flame.
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
We stock this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
An European Manufactured High Grade Nitrile Rubber Sheet designed specifically for use with Unleaded Petrol Fuels. This material being of European Manufacturing Source, has the required assurance, batch testing, certification and trace-ability for this most critical of applications. This grade has previously been referred to as OP16982b.
A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Potable Water Applications up to 23C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within the European Union for this critical Application.
A 40° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
Q204 is a Natural 60° Shore Rubber Sheet produced both to the latest European Standard on Structual Bearings BS EN 1337/3 & the historical approval of BS1154 Z60. Suitable for a number of Structual Bearing Applications, however designed specifically for inclusion in the manufacture of Bridge Bearings.
Rail45 Q854 is an European Union Manufactured Self Extinguishing Neoprene Rubber Sheet specifically designed to meet BS EN45545-2 2013, which is a specific standard for Materials used in all Railway Applications. This standard replaced EN45545-2 2009 and BS 6853:1999. Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
European Union Manufactured FoodSafe Neoprene/Chloroprene(CR) Rubber Sheeting conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/6 & FDA CFR Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.
European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
Maclellan Grade 1300 EPDM Material is a material designed specifically for making Boiler Door Joints & Hand Hole Gaskets. This Sheet Material is exclusively manufactured by MacLellan Rubber Ltd and the format allows greater flexibility in the size and shape of the joints produced over standard moulded joints.
A 40° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A 50° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
Designed for the Mining and Quarrying Industry, this Black Abrasion Resistant Natural Rubber has a diverse applications list, including Chute Lining, Shotblast Screens, Rifle Range Curtains, Road Sweeper Skirts well as applications within the Waste Water Industry.
A high quality Para Rubber material with extremely good mechanical properties and excellent abrasion resistance.
This material is used across Europe in Ballistic Curtain applications, at both indoor and outdoor ranges, protecting target shooters from ricocheting bullets.
The material is also recommended for a wide variety of wear applications both wet and dry.
European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600
A European Manufactured Premium Grade EPDM designed to ICI M228 Specification and used when Acid Resistance is specifically required. The material demonstrates an exceptional performance in weathering & ozone resistance and has excellent Flame Retardant properties.
A 50° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A 60° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A 70° Shore Peroxide Cured European Manufactured Rubber Sheeting having Excellent Ozone Resistance, High Temperature Resistance and Good Mechanical Properties.
European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.
Designed for the Mining and Quarrying Industry, this Red Abrasion Resistant Natural Rubber has a diverse applications list, including Chute Lining, Shotblast Screens, Rifle Range Curtains, Road Sweeper Skirts well as applications within the Waste Water Industry.
A 60° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A 70° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
European Union Manufactured 70° Shore EPDM Rubber Sheet with full traceability and test data available.
A 70° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A 80° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751 BA80:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A European Manufactured Tan "Shotblast" Natural Rubber Material with excellent abrasion resistant properties. Designed to be used as Shotblast Curtains/Screens but since have many other abrasion resistant uses. Sometimes referred to as "Para"or "Paragum" Rubber.
An 80° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed orignially for Aerospace & Defence Industries.
A 90° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.
A European Manufactured Material that meets the French Water Regulatory Approval Attestation De Conformite Sanitaire (ACS). Required for any Drinking Water Applications being sold into France.
A European Manufactured 40° Black Shotblast Natural Rubber with excellent Abrasion Resistant Properties. Originally designed for use as Shotblast Curtains but suitable for many Abrasion Resistant applications particularly in the Mining and Quarrying industries.
Manufactured to meet the physical and mechanical requirements of BS1154 Z40.
This vibration isolation and noise attenuation material is a unique formulation of high quality Neoprene. Manufactured exclusively by MacLellan Rubber MacMount is used as a Transformer Anti-Vibration Mount by Transformer Manufacturers and Installers all over the world and has been for over 40 Years.
A 60° Shore Nitrile Rubber Sheet specifically formulated for use with Gasoline. This rubber sheet benefits from being Manufactured in a European Facility with full traceability back to each 150Kg of Compound.
A High Quality European Manufactured Ethylene Propylene Diene Monomer (EPDM) Rubber Sheet with 40° Shore Hardness. 100% EPDM Polymer for Applications requring high resistance to Ozone and Weathering.
This vibration isolation and noise attenuation material is a unique formulation of high quality Neoprene for Low Temperature applications. Manufactured exclusively by MacLellan Rubber MacMount is used as a Transformer Anti-Vibration Mount by Transformer Manufacturers and Installers all over the world and has been for over 40 Years.
A Nitrile elastomer based Rubber Sheeting specially designed for gaskets seals used in pipes and fittings to carry gas and hydrocarbon fluids. This material meets the technical requirements of BS EN 682:2002.
This materials is available as Rubber Rolls, Cut Sheets and Uncured Compound.
European manufactured 50° Shore Nitrile(NBR)/Styrene Butadiene Rubber(SBR) Blended Rubber Sheet. This material benefits from having full traceability and test reports available.
Q163 BS1154 Y60 / OY60 Natural Rubber Sheet. A European Manufactured material to a traditional British Standard. This material benefits from the assurance and traceability you would expect with a specification grade.
A Gas Approved NBR(Nitrile) Rubber Sheeting certified to BS EN 549 B2H3, for use in applications involving Gas.
European Manufactured 65° Shore Chloroprene(CR) or Neoprene Rubber Sheeting. This material benefits from full traceability and test data.
European Manufactured 65° Shore Abrasion Resistant Natural Rubber Sheeting. Ideal for use in applications requiring a high degree of wear resistance and ideal applications may include, Skirting Rubber in Mining & Blades for Snow Ploughs or Cleaning Machines.
A 50° Shore European Manufactured EPDM Rubber Sheeting in Black with excellent Weathering & Ozone Resistance. The assurance of consistency of manufacture process and batch testing offered by European Manufacturers.
An European Manufactured Neoprene(Chloroprene - CR) Self Extinguishing Rubber Sheeting. Manufactured to the NF-F16101 standard meeting classification M2 F3
A specialised European Manufactured Nitrile Rubber Sheeting at 70° Shore hard, specifically designed for use with Transformer Oil. This NBR Rubber sheet boasts an excellent operating temperature with low temperature resistance of -40 C.
A Chloroprene/Neoprene Rubber designed for use in the Rail Industry, conforming with both UNE 23727:1990 & NF16101. This Rubber Sheeting is both Anti-Static & Flame Retardant - being of European Manufacture, this grade benefits from Full Test Results, Traceability & batch testing at each manufacturing process.
A 70° Shore European Manufactured Nitrile (NBR) Rubber Sheet with full Traceability. Nitrile is suitable for use in applications where resistance to oil is required.
A premium quality EPDM Rubber Sheeting that meets the requirements of BS EN 681-1-WA. A soft rubber at 50 IRHD, the compound is WRAS approved (Ref 161153).
0733 Nitrile(NBR) Rubber Sheeting is a premium, high polymer content material for applications requiring best performance against Oils with excellent resistance to swell and superior mechanical characteristics.
This material is often manufactured with a Milliken Insertion to further enhance the tear resistance and burst strength, especially in high pressure applications.
60° Shore Nitrile(NBR) Rubber Sheeting for Technical Applications
This Ethylene Propylene Diene Monomer (EPDM) Rubber sheeting is 100% Cured with Peroxide is of European Source so benefits from EU Assurance and traceability. This material has excellent compression set and good mechanical properties and is typically used for gaskets and joints in high temperature applications, and require ozone resistance as well as excellent mechanical properties.
A 60° Shore EPDM Rubber Sheeting to manufactured to the British Standard BS6014 EP 60S, this material has good physical properties, excellent ageing and ozone resistance.
A Genuine European Manufactured Chemours ® Viton ® A
Fluoroelastomer Rubber Sheet. A number of Materials are referred to as
Viton however only European or USA Manufactured Material carries the
assurance of being a genuine Chemours ® Polymer. Typically used
for its resistance to High Temperatures, Oils & Chemicals.
Viton B ® - 68% Flourine - Better Chemical Resistance.
Viton B ® Has better resistance and retains flexibility after dry heat ageing tha Viton A. It is reccomended for applications requiring maximum retention of elastic properties combined with good mechanical properties. Viton B ® is specifically recommended by the FSA (US Fluid Sealing Association) to resist SO2 (Sulphur Dioxide) atmosphers in thermal power stations.
Viton B ® offers superior resistance to both diluted and concentrated aggresive acids. B075 is also resistant to
Chemours ® Viton ® F - 70% Flourine - Better Chemical Resistance
The Viton &Reg; F Family wsa designed for use with Oxygenated Fules, modern lubricants and blended aggeressive chemical agents. As New Chemicals are developed Chemours is leading New Developments in Viton F to match the sealing challenges they create.
A high grade Butyl Rubber Sheet that offer exceptional performance in a wide range of applications.
The material has been formulated to be Compliant with USP 381 Biological and Physicochemical
requirements.
Complete laboratory test can be supplied at extra cost
A Genuine European Manufactured Chemours ® Viton ® A
Fluoroelastomer Rubber Sheet FDA 21 CFR 177.2600 compliant. A number of Materials are referred to as
Viton however only European or USA Manufactured Material carries the
assurance of being a genuine Chemours ® Polymer. Typically used
for its resistance to High Temperatures, Oils & Chemicals.
European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.
EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302
European manufactured 65° Shore Nitrile(NBR)/Styrene Butadiene Rubber(SBR) Blended Rubber Sheet. This material benefits from having full traceability and test reports available
European manufactured 70° Shore Butyl(IIR) Rubber sheet. This material benefits from full traceability back to constituent ingredients and batch test data at each stage of manufacture as well as having a superior Polymer Quality than most non-european imports making it suitable for those applications requiring that higher degree of confidence.
A Chlorosulphonated Polyethylene Rubber Sheeting 65° Shore Hardness, excellent resistance to Ozone and Dilute Acids.
Q010 is a European Manufactured High Quality CSM better known as Hypalon and often referred to as a superior type of Chloroprene(Neoprene). It has improved Heat and Chemical Resistance over Neoprene and has Low Gas Permeability and its Electrical Properties are good. Good for Static Seals in hot and humid conditions.
A versatile medium firmness silicone that offers the lightness of a foam with the enhanced sealing capabilities of a traditional sponge rubber. Use in Electronics Enclosures in outside environments for protection against wind, rain and fire.
Meets Global Standards including AMS3195 and FAR 25.853.
A High Strength Silicone material designed for extreme temperatures and applications within the Aerospace Industry where its excellent Damping, Mechanical and Electrical Resistance properties are widely recognised.
The material is manufactured from Compound that meets the physical and technical requirements of AMS 3345.
European Manufactured High Quality Styrene Butadiene Rubber (SBR). Benefiting from Full Batch Testing and Traceability right through the manufacturing process.
European manufactured 65° Shore Nitrile(NBR) Rubber Sheet. This material benefits from having full traceability and test reports available.
European Manufactured 60° Shore Chloroprene(CR) or Neoprene Rubber Sheeting. This material benefits from full traceability and test data.
A high density Rubber Granulate Protective Sheeting for building & Construction applications. Constructed of coarse rubber granulate bonded with a cold cure PUR.
A Natural Rubber(NR)/SBR Blended Rubber Sheeting with a Cotton Insertion for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Natural Rubber and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
Fluorosilicone Sheeting is designed for use with harsh chemicals or fluids in extreme conditions and where normal Silicone would degrade.
An 80° Shore Neoprene (CR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Neoprene and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 70° Shore Neoprene (CR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Neoprene and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 70° Shore Nitrile (NBR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Nitrile and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 50° Shore Neoprene (CR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Rubber Sheet that will carry some performance characteristics of Neoprene and some of SBR and is suitable for a variety of Lower Technology Sealing Applications.
A 40° Shore Neoprene (CR)/SBR Blended Rubber Sheeting for General Purpose or Gasketing use. A Hybrid Material that will carry some performance characteristics of Neoprene and some of SBR and is suitable for a variety of Lower Technology Sealing Applications. Choose this softer material for use with distorted or uneven surfaces.
FluoroMac 50 Shore A FKM Fluoroelastomer Rubber Sheeting. Typically used for its resistance to High Temperatures, Oils & Chemicals
FluoroMac 70° Shore FKM Fluoroelastomer Rubber Sheeting. Typically used for its resistance to High Temperatures, Oils & Chemicals
A Genuine European Manufactured Chemours ® Viton ® A
Fluoroelastomer Rubber Sheet. A number of Materials are referred to as
Viton however only European or USA Manufactured Material carries the
assurance of being a genuine Chemours ® Polymer. Typically used
for its resistance to High Temperatures, Oils & Chemicals.
Hydrogenated Nitrile (HNBR) is superior to normal Nitrile (NBR), achieved through saturating the Butadiene with Hydrogen. This makes the Rubber Sheeting more resistant to Oils & Gasses (including Sour Gas), improves its physical properties and increases the working temperature range
A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.
Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.
This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.
A good quality general purpose Latex Natural Rubber Sheeting with good transparency in natural colour. This material is widely used for vacuum blankets in composite mouldings, as a Bakery release film, for cut diaphragms, seals and gaskets, for manufacture or flexible connectors and in medical environments as surgical straps and tourniquets.
Grade S formulation Sheeting in Natural and White colours meet the requirements of BGVV, FDA CRF21 section 177.2600 - Rubber Articles for repeated use in contact with foodstuffs.
Specifications
Rail 45 EPDM is a low smoke, low toxic rubber sheet that meets multiple Flame Resistance standards including EN45545-2, NF F16-101, UL94 V0, DIN 5510 and BS6853.
This premium grade material is European manufactured is batch tested for complete traceability and is certified Halogen and Nitrosamine Free.
A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.
This grade has been developed with a good Magnetic Pull strength, 8.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).
Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.
FluoroMac 60 Shore A FKM Fluoroelastomer Rubber Sheeting. Typically used for its resistance to High Temperatures, Oils & Chemicals.
A premium grade European manufactured Flame Resistant Nitrile Rubber sheeting certified to UL94 VO. Suitable for a range of applications in Marine, Aerospace, Offshore and Transport environments where good Oil Resistance is required in addition to exception Flame Resistance and excellent mechanical properties.
A high performance Silicone Rubber Sheeting with excellent Flame Retardant properties, and Low Smoke and Low Toxicity performance characteristics. The material meets many of the main international Flame Retardant standards for the Rail Industry including:
EN45545-2 HL3, BS6853 Cat 1a, NF F-16-101 Catagories F1 & I2, DIN 5510-2, LUL 1-085 A2 Table 4, UL94 V0 (3mm).
MacFire Neoprene is a high performance Neoprene material meeting Fire Resistant standards UL94 V0 and UNE 23727 M2 and confirming with smoke opacity and toxicity standards NF F16101 and NF X 70100 F5.
In addition the material is Anti-static, animal and vegetable Oil Resistant, Thermal and Acoustically Insulative.
The material has exception wear resistance making it suitable for use in a variety of applications in quarrying and mining and offshore environments, and can also be used as a matting in high risk areas.
Manufactured with a fabric pattern. Other options available subject to minimum production batches.
A 90° Shore European Manufactured EPDM Rubber Sheeting in Black with excellent Weathering & Ozone Resistance. The assurance of consistency of manufacture process and batch testing offered by European Manufacturers.
MR6370 is a premium nickel plated graphite filled silicone elastomer providing excellent EMI shielding performance. The material offers excellent corrosion resistance and flame retardant performance.
FluoroSilicone Sheeting 70° Shore to MIL-R-25988 TY2 CL1 GR70. Fluorosiliconse Sheeting has been engineered to be used where normal silicone would degrade when up against harsh chemicals and/or extreme environments. This grade has an excellent Operating temperature range from -60° C to +230° C and can even perform at +250°C in short bursts.
Q059 Yellow 45° Shore Abrassive Resistant Rubber Sheet for use in applications where a high tear strength and resistance to wear from abrassive media. This material has excellent tensile strength and a high elongation @ break.
Q853 is a European Union Manufactured Self Extinguishing Neoprene Rubber Sheet that is low smoke, low toxic rubber sheet that meets Flame Resistance standard EN45545-2.
An extremely high performance product manufactured by combining Nano PTFE Particles and FKM polymer to create a Low Friction, Low Gas Permeable, High Tensile and Abrasion Resistant material with wide ranging Chemical Resistance, suitable for a range of Sealing application in Medical, Bio-Chemical, Petrochemical and the Food and Drink Industries.
This material is tested and approved to USP Class VI, FDA Compliant and capable of meeting the requirements of many other Food and Drinking Water standards.
Currently produced as moulded sheets for the manufacture of Seals and Gaskets or as a compound for mouldings and extrusions.
A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Hot Potable Water Applications up to 85C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within Europe for this critical Application.
EnviroPolymer-EP is a high performance EPDM rubber produced from 95% + Renewably Sourced and Recycled ingredients. A market leading product manufactured with a revolutionary formulation and unique processing technology.
With excellent mechanical properties the material is Heat, Weather, Ozone and UV resistant and suitable for a wide range of industrial applications in Automotive, Transport, Electronics, Construction, Marine, and Power Generation industries.
This material is exclusively compounded and manufactured for MacLellan Rubber.
A high performance natural rubber, non toxic sheeting with good mechanical properties and ideal for dynamic applications a low and ambient temperatures. Developed as lining material where a high resistance to acids, alkalis and associated salts is required.
FluoroSilicone Sheeting 60° Shore to MIL-R-25988 TY2 CL1 GR60. Fluorosilicone Sheeting has been engineered to be used where normal silicone would degrade when up against harsh chemicals and/or extreme environments. This grade has an excellent Operating temperature range from -60° C to +230° C and can even perform at +250°C in short bursts.
This material also meets the technical requirements of MIL-DTL-25988 and AMS3325.
A commercial FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming that meets the requirements of FDA CFR 177 Sub Part C 177.2600.
|
|
|
01902 307711
