C653 70° Shore A Peroxide Cured EPDM Rubber Sheeting
This Ethylene Propylene Diene Monomer (EPDM) Rubber sheeting is 100% Cured with Peroxide is of European Source so benefits from EU Assurance and traceability. This material has excellent compression set and good mechanical properties and is typically used for gaskets and joints in high temperature applications, and require ozone resistance as well as excellent mechanical properties.
Compression Set(22 Hours @ 70°C)
13 %
Compression Set(22 Hours @ 70°C)
13 %
Elongation at Break
200 %
Elongation at Break
200 %
Heat Ageing - Change in Elongation @ Break
-5 %
Heat Ageing - Change in Elongation @ Break
-5 %
Heat Ageing - Change in Hardness
+2 ° Shore
Heat Ageing - Change in Hardness
+2 ° Shore
Heat Ageing - Change in Tensile Strength
-1 %
Heat Ageing - Change in Tensile Strength
-1 %
Highest Recommended Working Temperature
150 °C
Highest Recommended Working Temperature
150 °C
Lowest Recommended Working Temperature
-35 °C
Lowest Recommended Working Temperature
-35 °C
Shore Hardness (Shore A)
70 ° Shore
Shore Hardness (Shore A)
70 ° Shore
Specific Gravity
1.23 g/cm3
Specific Gravity
1.23 g/cm3