Polymers to Industry
Menu
Back BACK
Media Compatibility Icon
Media Compatibility
Ask George Icon
Media Compatibility Icon
Media Compatibility
Ask George Icon

Metal Detectable Silicone High Pull Strength EU1935:2004

Metal Detectable Silicone High Pull Strength EU1935:2004
A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.
This grade has been developed with a High Magnetic Pull strength, 11.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).
Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.
This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.
Note this material is classified as Black in colour due to the high level of metal detectable particles.

Brittle Point
-80 °C
Brittle Point
-80 °C
Compression Set
13 %
Compression Set
13 %
Dielectric Constant
2.9  
Dielectric Constant
2.9  
Elongation at Break
290 %
Elongation at Break
290 %
Highest Recommended Working Temperature
200 °C
Highest Recommended Working Temperature
200 °C
Intermittent Working Temperature
250 °C
Intermittent Working Temperature
250 °C
Lowest Recommended Working Temperature
-60 °C
Lowest Recommended Working Temperature
-60 °C
Magnetic Pull
11.3 mm
Magnetic Pull
11.3 mm
Shore Hardness (Shore A)
61 ° Shore
Shore Hardness (Shore A)
61 ° Shore
Tear Strength
21 N/mm
Tear Strength
21 N/mm
Tensile Strength
7.5 MPA
Tensile Strength
7.5 MPA
Thermal Conductivity
0.24 W/m.K
Thermal Conductivity
0.24 W/m.K
Food Contact Suitability
Metal Detectable
EU1935:2004
FDA Approved
Made in the UK
REACH Compliant

SIMILAR PRODUCT