Polymers to Industry
Menu
Back BACK
Media Compatibility Icon
Media Compatibility
Ask George Icon
Media Compatibility Icon
Media Compatibility
Ask George Icon

1362 UK Manufactured 70° Shore WRAS EPDM to BS EN 681-1 for Potable Water

1362 UK Manufactured 70° Shore WRAS EPDM to BS EN 681-1 for Potable Water

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Potable Water Applications up to 23C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within the European Union for this critical Application.

Typically sold in Rolls that are 1.6 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
 

We stock this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick 

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

Compression Set(22 Hours @ 70°C)
20 %
Compression Set(22 Hours @ 70°C)
20 %
Elongation at Break
200 %
Elongation at Break
200 %
Highest Recommended Working Temperature
100 °C
Highest Recommended Working Temperature
100 °C
Intermittent Working Temperature
110 °C
Intermittent Working Temperature
110 °C
Lowest Recommended Working Temperature
-15 °C
Lowest Recommended Working Temperature
-15 °C
Potable Water Temperature Rating
23 °C
Potable Water Temperature Rating
23 °C
Shore Hardness (Shore A)
70 ° Shore
Shore Hardness (Shore A)
70 ° Shore
Specific Gravity
1.22 g/cm3
Specific Gravity
1.22 g/cm3
Tensile Strength
9 MPA
Tensile Strength
9 MPA
WRAS Approval Number
1911536  
WRAS Approval Number
1911536  
Chemical Resistant
Ozone Resitance
Potable Water Suitability
Water Resistant
Weather Resistance
Made in the UK
REACH Compliant
Water Council Approved

SIMILAR PRODUCT