The authority on Polymer Sheeting & Rubber Products
The authority on Polymer Sheeting & Rubber Products
Menu
Back BACK
Media Compatibility Icon
Media Compatibility
Ask George Icon
Media Compatibility Icon
Media Compatibility
Ask George Icon

1323 UK Manufactured 70° Shore WRAS EPDM to BS EN 681-1 for Hot Potable Water

1323 UK Manufactured 70° Shore WRAS EPDM to BS EN 681-1 for Hot Potable Water

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Hot Potable Water Applications up to 85C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within Europe for this critical Application. 


Accelerated Ageing - Change in Elongation at Break (168 Hours @ 70°C)
+10/-40 %
Accelerated Ageing - Change in Elongation at Break (168 Hours @ 70°C)
+10/-40 %
Accelerated Ageing - Change in Tensile Strength (168 Hours @ 70°C)
-20 %
Accelerated Ageing - Change in Tensile Strength (168 Hours @ 70°C)
-20 %
Accelerated Ageing - Change in Hardness (168 Hours @ 70°C)
+8/-5 ° Shore
Accelerated Ageing - Change in Hardness (168 Hours @ 70°C)
+8/-5 ° Shore
Compression Set
< 20 %
Compression Set
< 20 %
Density
1.17 g/cm3
Density
1.17 g/cm3
Elongation at Break
> 200 %
Elongation at Break
> 200 %
Highest Recommended Working Temperature
100 °C
Highest Recommended Working Temperature
100 °C
Lowest Recommended Working Temperature
-10 °C
Lowest Recommended Working Temperature
-10 °C
Potable Water Temperature Rating
85 °C
Potable Water Temperature Rating
85 °C
Shore Hardness(IRHD)
70 ° Shore
Shore Hardness(IRHD)
70 ° Shore
Tensile Strength
9 MPA
Tensile Strength
9 MPA
PURPOSES
Potable Water Suitability
Water Resistant
Weather Resistance
Made in the UK
REACH Compliant
Water Council Approved

SIMILAR PRODUCT