Sheet Rubber for Food & Drink Industry Sector

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.

We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

European Union Manufactured Food Safe Grade Natural Rubber (NR) Rubber Sheet conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.260

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Potable Water Applications up to 23C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within the European Union for this critical Application.

European Union Manufactured FoodSafe Neoprene/Chloroprene(CR) Rubber Sheeting conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/6 & FDA CFR Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.

EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302

1366 is an 80° Shore EPDM Elastomer with good physical properties, excellent ageing and ozone resistance developed for use as seals in Cold Potable Water Applications.

A premium quality EPDM Rubber Sheeting that meets the requirements of BS EN 681-1-WA. A soft rubber at 50 IRHD, the compound is WRAS approved (Ref 161153).

MacNetic is a Premium Grade Blue Nitrile Rubber Sheet Metal Detectable by electromagnetic sensors and magnetic detectors. Coloured Blue for industry compliance within the Food, Pharmaceutical, Chemical and Cosmetics industries.

Independently certified EU1935:2004 compliant for contact with foodstuffs, Nitrosamine Free, Bisphenol A (BPA) Free and Animal Derived Ingredients Free (ADI).

Suitable for applications including gaskets, seals, joints, skirts and curtains within safety critical industries.  

Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 6mm and 5 Metres Long for 8mm and above.

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.

Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.

This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries. 

A good quality general purpose Latex Natural Rubber Sheeting with good transparency in natural colour.  This material is widely used for vacuum blankets in composite mouldings, as a Bakery release film, for cut diaphragms, seals and gaskets, for manufacture or flexible connectors and in medical environments as surgical straps and tourniquets.

Grade S formulation Sheeting in Natural and White colours meet the requirements of BGVV, FDA CRF21 section 177.2600 - Rubber Articles for repeated use in contact with foodstuffs.

A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.

This grade has been developed with a High Magnetic Pull strength, 11.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).

Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.

This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.

Note this material is classified as Black in colour due to the high level of metal detectable particles.

A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.

This grade has been developed with a good Magnetic Pull strength, 8.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).

Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.

This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.

A high quality Food Quality EPDM with low electrical resistivity, suitable for a range of antistatic applications in the Food Industry and similar processing environments where FDA approval is required.

A European Manufactured Specification White Natural Rubber that conforms to BS1154:Y50

A 90° Shore European Manufactured EPDM Rubber Sheeting in Black with excellent Weathering & Ozone Resistance. The assurance of consistency of manufacture process and batch testing offered by European Manufacturers.

SI60 Grade FDA Approved 60 Shore Silicone Sheeting - Available in White, Black, Blue, Translucent and Red

An extremely high performance product manufactured by combining Nano PTFE Particles and FKM polymer to create a Low Friction, Low Gas Permeable, High Tensile and Abrasion Resistant material with wide ranging Chemical Resistance, suitable for a range of Sealing application in Medical, Bio-Chemical, Petrochemical and the Food and Drink Industries.

This material is tested and approved to USP Class VI, FDA Compliant and capable of meeting the requirements of many other Food and Drinking Water standards.  

Currently produced as moulded sheets for the manufacture of Seals and Gaskets or as a compound for mouldings and extrusions.

MacLellan 40 Shore Silicone Rubber  Available in White, Black, Translucent.  FDA Approved.

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Hot Potable Water Applications up to 85C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within Europe for this critical Application.