Sheet Rubber for Pharmaceutical Industry Sector

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.

We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

European Union Manufactured Food Safe Grade Natural Rubber (NR) Rubber Sheet conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.260

European Union Manufactured FoodSafe Neoprene/Chloroprene(CR) Rubber Sheeting conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/6 & FDA CFR Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.

EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302

European manufactured 65° Shore Nitrile(NBR)/Styrene Butadiene Rubber(SBR) Blended Rubber Sheet. This material benefits from having full traceability and test reports available

MacNetic is a Premium Grade Blue Nitrile Rubber Sheet Metal Detectable by electromagnetic sensors and magnetic detectors. Coloured Blue for industry compliance within the Food, Pharmaceutical, Chemical and Cosmetics industries.

Independently certified EU1935:2004 compliant for contact with foodstuffs, Nitrosamine Free, Bisphenol A (BPA) Free and Animal Derived Ingredients Free (ADI).

Suitable for applications including gaskets, seals, joints, skirts and curtains within safety critical industries.  

Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 6mm and 5 Metres Long for 8mm and above.

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.

This grade has been developed with a High Magnetic Pull strength, 11.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).

Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.

This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.

Note this material is classified as Black in colour due to the high level of metal detectable particles.

A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.

This grade has been developed with a good Magnetic Pull strength, 8.3mm using test method SEWI 700, and meets the Flammability requirements for FAR 25/JAR 25/CS 25 Appendix F Part 1 (a)(1)(iv).

Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.

SI60 Grade FDA Approved 60 Shore Silicone Sheeting - Available in White, Black, Blue, Translucent and Red

An extremely high performance product manufactured by combining Nano PTFE Particles and FKM polymer to create a Low Friction, Low Gas Permeable, High Tensile and Abrasion Resistant material with wide ranging Chemical Resistance, suitable for a range of Sealing application in Medical, Bio-Chemical, Petrochemical and the Food and Drink Industries.

This material is tested and approved to USP Class VI, FDA Compliant and capable of meeting the requirements of many other Food and Drinking Water standards.  

Currently produced as moulded sheets for the manufacture of Seals and Gaskets or as a compound for mouldings and extrusions.

FluoroSilicone Sheeting 60° Shore to MIL-R-25988 TY2 CL1 GR60. Fluorosilicone Sheeting has been engineered to be used where normal silicone would degrade when up against harsh chemicals and/or extreme environments. This grade has an excellent Operating temperature range from -60° C to +230° C and can even perform at +250°C in short bursts.

This material also meets the technical requirements of MIL-DTL-25988 and AMS3325.

A Genuine European Manufactured Chemours ® Viton ® A
Fluoroelastomer Rubber Sheet FDA 21 CFR 177.2600 compliant. A number of Materials are referred to as
Viton however only European or USA Manufactured Material carries the
assurance of being a genuine Chemours ® Polymer. Typically used
for its resistance to High Temperatures, Oils & Chemicals.

European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.