Sheet Rubber for Water & Waste Water Industry Sector

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.

We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.

Rubber Rolls will normally be Palletised and sent using a National Pallet Network.

European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Potable Water Applications up to 23C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within the European Union for this critical Application.

Designed for the Mining and Quarrying Industry, this Red Abrasion Resistant Natural Rubber has a diverse applications list, including Chute Lining, Shotblast Screens, Rifle Range Curtains, Road Sweeper Skirts well as applications within the Waste Water Industry.

Designed for the Mining and Quarrying Industry, this Black Abrasion Resistant Natural Rubber has a diverse applications list, including Chute Lining, Shotblast Screens, Rifle Range Curtains, Road Sweeper Skirts well as applications within the Waste Water Industry.

EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302

1366 is an 80° Shore EPDM Elastomer with good physical properties, excellent ageing and ozone resistance developed for use as seals in Cold Potable Water Applications.

A premium quality EPDM Rubber Sheeting that meets the requirements of BS EN 681-1-WA. A soft rubber at 50 IRHD, the compound is WRAS approved (Ref 161153).

A European Manufactured Material that meets both the German Umweltbundesamt (UBA) and French Water Regulatory Approval Attestation De Conformite (ACS) standards

All seals and gaskets used in Potable Water Applications must be made from approved materials independently certified by a recognised test laboratory.

MacLellan is committed to using only materials manufactured within the European Union for this critical application.

A European Manufactured Specification White Natural Rubber that conforms to BS1154:Y50

A 90° Shore European Manufactured EPDM Rubber Sheeting in Black with excellent Weathering & Ozone Resistance. The assurance of consistency of manufacture process and batch testing offered by European Manufacturers.

A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Hot Potable Water Applications up to 85C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within Europe for this critical Application. 

A high performance natural rubber, non toxic sheeting with good mechanical properties and ideal for dynamic applications a low and ambient temperatures.  Developed as lining material where a high resistance to acids, alkalis and associated salts is required.