Media Compatibility Icon

Media Compatibility
Ask George Icon

Sheeting for Chemical Processing Industry Sector

European manufactured 50° Shore Nitrile(NBR)/Styrene Butadiene Rubber(SBR) Blended Rubber Sheet. This material benefits from having full traceability and test reports available.


+ VIEW ALL PROPERTIES

Q010 is a European Manufactured High Quality CSM better known as Hypalon and often referred to as a superior type of Chloroprene(Neoprene). It has improved Heat and Chemical Resistance over Neoprene and has Low Gas Permeability and its Electrical Properties are good. Good for Static Seals in hot and humid conditions.


+ VIEW ALL PROPERTIES

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600


+ VIEW ALL PROPERTIES

European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600


+ VIEW ALL PROPERTIES

A European Manufactured Premium Grade EPDM designed to ICI M228 Specification and used when Acid Resistance is specifically required. The material demonstrates an exceptional performance in weathering & ozone resistance and has excellent Flame Retardant properties.


+ VIEW ALL PROPERTIES

A Genuine European Manufactured Chemours® Viton® A Fluoroelastomer Rubber Sheet. A number of Materials are referred to as Viton however only European or USA Manufactured Material carries the assurance of being a genuine Chemours® Polymer. Typically used for its resistance to High Temperatures, Oils & Chemicals.


+ VIEW ALL PROPERTIES

Hydrogenated Nitrile (HNBR) is superior to normal Nitrile (NBR), achieved through saturating the Butadiene with Hydrogen. This makes the Rubber Sheeting more resistant to Oils & Gasses (including Sour Gas), improves its physical properties and increases the working temperature range


+ VIEW ALL PROPERTIES

A 70° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

An 80° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed orignially for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 40° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 50° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 60° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 70° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 80° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751 BA80:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 90° Shore Butadiene Acrylonitrile Rubber (NBR) or as better known Nitrile Specification Rubber Sheet conforming to BS2751:2001 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302


+ VIEW ALL PROPERTIES

A Chlorosulphonated Polyethylene Rubber Sheeting 65° Shore Hardness, excellent resistance to Ozone and Dilute Acids.


+ VIEW ALL PROPERTIES

Fluorosilicone Sheeting is designed for use with harsh chemicals or fluids in extreme conditions and where normal Silicone would degrade.

Particularly suitable for Low Temperature Applications


+ VIEW ALL PROPERTIES

A High Quality Grade Y Compressed Fibre Jointing manufactured from a blend of Heat Resistant Fibres and elastomeric binder. Approved to DIN-DVGW, WRAS and BS7531 Grade Y.


+ VIEW ALL PROPERTIES

A superior quality Grade X Jointing with excellent mechanical properties and a wide range of approvals including DIN-DVGW, WRAS, BAM & BS7531 Grade X


+ VIEW ALL PROPERTIES

J201 is a universal grade of Silica filled PTFE suitable for many general applications. Suitable for use with strong Acids & Alkalis, solvents, fuels, water, steam and chlorine. The grade has very low gas permeability and excellent creep resitance.


+ VIEW ALL PROPERTIES

High Performance glass fibre filled PTFE Sheet with biaxal strength suitable for standard and irregular flanges. Designed for low bolt torque applications and irregular flanges. Suitable for use on glass lined vessels, ceramic or plasic flanges where there is uneven surface finish.Suitable for a wide spectrum of chemicals across the whole PH range. J202 has Low Gas Permeability and excellent Creep resistance.


+ VIEW ALL PROPERTIES

High Performance PTFE Sheet with Barium Sulphate Filler - J203 is a good general purpose grade for sealing applications over the whole PH Range. Suitable for Hydrofluoric Acid (although not Pure Liquid Hydrogen Fluoride.


+ VIEW ALL PROPERTIES

A Low Cost Jointing material for Low-Tech applications including hot and cold water, low pressure steam, fuels, gases, oils and some chemicals. This material is WRAS Approved.


+ VIEW ALL PROPERTIES

Stainless Steel 316 Tanged Exfoliated Graphite Sheet, constructed with an adhesive free lamination process, that gives excellent mechanical strength to this robust gasket material. This is suitable for Extremely High Temperature applications up to 500°c combined with High Internal Pressures up to 120 Bar.


+ VIEW ALL PROPERTIES

An advanced expanded PTFE (ePTFE) jointing material manufactured from 100% PTFE. Easy to handle cut and install with a low clamping force, suitable for a wide range of applications across many industries.


+ VIEW ALL PROPERTIES

A premium quality Grade X Jointing based on Carbon Fibre with a high quality Nitrile Rubber Binder. This material has excellent mechanical properties and a wide range of approvals including TA-Luft, API 607 Fire Safe and BS7531 Grade X


+ VIEW ALL PROPERTIES

This Flourosilicone Closed Cell Sponge Rubber is flexible and compressible and designed for use in applications that have extreme Operating Temperature Ranges. This material has excellent weathering characteristics, compression set resistance, electrical strength and non-stick properties. It is often the choice for applications containing oils and fluids that would degrade normal elastomers. As well as the specification ASTM D6576 Type 2 Grade A,B & C this sponge rubber complies to MIL-R-6130 Type II Grade A and AMS 3323


+ VIEW ALL PROPERTIES