A high performance PTFE Packing with no impregnation or additives, designed for use on Oxygen Applications and suitable for use with All Chemicals.
A high performance packing manufactured from a specially lubricated PTFE Yarn, suitable for all chemicals and solvents.
A superior performance Packing manufactured from Graphited ePTFE yarn using the Crossplait Technique. Designed to operate on High Speed, Rotary & Reciprocating Applications.
A high performance multi-filament Graphited PTFE Packing impregnated with High Temperature Lubricant. Recommended for its excellent performance at high pressure and its anti-extrusion properties.
Manufactured from Pure Expanded Graphite containing minimum amounts of trace elements such as Sulphur & Chloride then reinforced with Inconel Wire.
Manufactured from Pure Expanded Graphite containing minimum amounts of trace elements such as Sulphur & Chloride.
A superior quality low emission Packing, manufactured to ISO15848-1:2006and tested to Shell SPE77/312, constructed from exfoliated graphite reinforced by knitted inconel wire mesh, designed to reduce fugitive emissions with ease and requires no special fitting technique.
A cost effective universal packing manufactured from Aramid and pre-oxidised acrylic. This packing has excellent chemical resistance, low surface friction and low permeability.
Manufactured from BCX yarn manufactured with a Graphite Lubricant, this packing is specifically designed for use on hot air and gases and has a low co-efficient of friction.
P090 is manufactured from pure PTFE spirally wrapped to form a cord for fitting into restricted gland spaces. This production method reduces lateral flow and the possibility of extrusion. For use in Valve Gland Packings or universal flange gasket. Suitable for use with water, steam, oils, solvents, oxygen, gases and all chemicals with the exception of molten alkali metals and fluorine.
PK3800 is a high performance hatch packing designed for road, rail and sea hatches. With an EPDM Rubber core and PTFE wrapped outer cover it has excellent recovery characteristics after repeated compression and is impervious to liquids and chemicals.
The product is available in square or rectangular cross sections to accommodate any irregularities in the tank lid and can be supplied in continuous coil, cut lengths or pre-formed endless rings to suit your needs.
The product is accepted by US Coastguards for use with Propylene Oxide and 1,2 -Butylene Oxide.