This Flourosilicone Closed Cell Sponge Rubber is flexible and compressible and designed for use in applications that have extreme Operating Temperature Ranges. This material has excellent weathering characteristics, compression set resistance, electrical strength and non-stick properties. It is often the choice for applications containing oils and fluids that would degrade normal elastomers. As well as the specification ASTM D6576 Type 2 Grade A,B & C this sponge rubber complies to MIL-R-6130 Type II Grade A and AMS 3323
EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302
A High Strength Silicone material designed for extreme temperatures and applications within the Aerospace Industry where its excellent Damping, Mechanical and Electrical Resistance properties are widely recognised.
The material is manufactured from Compound that meets the physical and technical requirements of AMS 3345.
A versatile medium firmness silicone that offers the lightness of a foam with the enhanced sealing capabilities of a traditional sponge rubber. Use in Electronics Enclosures in outside environments for protection against wind, rain and fire.
Meets Global Standards including AMS3195 and FAR 25.853.
27118 is a highly versatile medium firmness Silicone offering the lightness of a foam with the sealing capabilities of a traditional Sponge Rubber. Use to seal against penetration of dust, moisture, air and light within indoor or outdoor enclosures, such as lighting and electronics and Heating Ventilation and Air Conditioning. This product has, Excellent Memory and low stress relaxation, Good Resistance to Ultraviolet light, ozone, extreme temperatures and flame, FDA Compliance in accordance with FDA Regulation 21 CFR 177.2600
Closed Cell Silicone Sponge suitable for applications requiring avoidance of dust or water ingress up to IP65 standards. The material meets WRAS, FDA and Flammability standards including FAR 25/JAR 25/CS 25 Appendix F Part 1, (a)(1)(iv) and (a)(1)(v).
The material has excellent resistance to ozone, oxidation, UV, ionising radiation and weathering.
MR6370 is a premium nickel plated graphite filled silicone elastomer providing excellent EMI shielding performance. The material offers excellent corrosion resistance and flame retardant performance.
Fluorosilicone Sheeting is designed for use with harsh chemicals or fluids in extreme conditions and where normal Silicone would degrade.
A general purpose closed cell, medium density, silicone sponge for use in extreme temperature applications where environmental resistance is needed.
Accreditations include UL94HB, FMVSS 302, FAR 25 (Horizontal) and WRAS.
The material meets the technical requirements of ASTM D1056 2A2, AMS3195, ASTM 6576 Grades A, B and C (Soft-medium).
A high performance Silicone Rubber Sheeting with excellent Flame Retardant properties, and Low Smoke and Low Toxicity performance characteristics. The material meets many of the main international Flame Retardant standards for the Rail Industry including:
EN45545-2 HL3, BS6853 Cat 1a, NF F-16-101 Catagories F1 & I2, DIN 5510-2, LUL 1-085 A2 Table 4, UL94 V0 (3mm).
A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.
Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.
This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.
|
|