Media Compatibility Icon

Media Compatibility
Ask George Icon

Sheeting for Marine Industry Sector

A 40° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 50° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 60° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

A 70° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed originally for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

An 80° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed orignially for Aerospace & Defence Industries.


+ VIEW ALL PROPERTIES

70° Shore EPDM Rubber Sheet with a High Tensile Strength of 17 Mpa.


+ VIEW ALL PROPERTIES

European manufactured 65° Shore Nitrile(NBR)/Styrene Butadiene Rubber(SBR) Blended Rubber Sheet. This material benefits from having full traceability and test reports available


+ VIEW ALL PROPERTIES

A High Quality European Manufactured Ethylene Propylene Diene Monomer (EPDM) Rubber Sheet with 40° Shore Hardness. 100% EPDM Polymer for Applications requring high resistance to Ozone and Weathering.


+ VIEW ALL PROPERTIES

A premium quality EPDM Rubber Sheeting that meets the requirements of BS EN 681-1-WA. A soft rubber at 50 IRHD, the compound is WRAS approved (Ref 161153).


+ VIEW ALL PROPERTIES

A High Quality Grade Y Compressed Fibre Jointing manufactured from a blend of Heat Resistant Fibres and elastomeric binder. Approved to DIN-DVGW, WRAS and BS7531 Grade Y.


+ VIEW ALL PROPERTIES

A superior quality Grade X Jointing with excellent mechanical properties and a wide range of approvals including DIN-DVGW, WRAS, BAM & BS7531 Grade X


+ VIEW ALL PROPERTIES

J201 is a universal grade of Silica filled PTFE suitable for many general applications. Suitable for use with strong Acids & Alkalis, solvents, fuels, water, steam and chlorine. The grade has very low gas permeability and excellent creep resitance.


+ VIEW ALL PROPERTIES

A Low Cost Jointing material for Low-Tech applications including hot and cold water, low pressure steam, fuels, gases, oils and some chemicals. This material is WRAS Approved.


+ VIEW ALL PROPERTIES

A premium quality Grade X Jointing based on Carbon Fibre with a high quality Nitrile Rubber Binder. This material has excellent mechanical properties and a wide range of approvals including TA-Luft, API 607 Fire Safe and BS7531 Grade X


+ VIEW ALL PROPERTIES