Single Face CSPE Coated Polyamide to BSF 136 N90, coated with Signal Red Chlorosulphonated Polyethylene (Hypalon). Typical Applications include Aerospace, Aircraft Engine Covers, Penants and Covers
This Nitrile(NBR) Nylon Diaphragm Sheet Rubber is a Coated Fabric Sheet suitable for use wtih LPG & CNG, Compressed Air, Methane, Pentane, Propane, Aliphatic Hydrocarbons. Also suitable for Mineral & Silicone Oils.
Designed to protect engineers when working with live voltages up to 500v. Typical uses include underground cable jointing, overhead conductors and link box maintenance. This particular shrouding material is Brown in colour and conforms to ASTM F2320 - Class 00 and is manufactured in the European Union.
Designed to protect engineers when working with live voltages up to 1000v. Typical uses include underground cable jointing, overhead conductors and link box maintenance. This particular shrouding material is Yellow in colour and conforms to ASTM F2320 - Class 0 and is manufactured in the European Union.
Designed to protect engineers when working with live voltages up to 75000v. Typical uses include underground cable jointing, overhead conductors and link box maintenance. This particular shrouding material is Yellow on 1 side and orange underneath and conforms to ASTM F2320 - Class 1 Type 2B and is manufactured in the European Union.
LascarOil is a high performance coated fabric produced using high strength cotton fabric and premium quality Nitrile Rubber compound.
The material is supplied as an uncured sheeting and then used in the manufacture of profiled seals, which when vulcanised are suitable for use in a wide range of equipment in the processing of abrasive powders, hydrocarbons, oils, fats, greases and hydraulic fluids.
This Nitrile(NBR) Nylon Diaphragm Sheet Rubber is a Coated
Fabric Sheet suitable for use wtih LPG & CNG, Compressed Air, Methane,
Pentane, Propane, Aliphatic Hydrocarbons. Also suitable for Mineral &
Silicone Oils.
The material is supplied Uncured for manufacture of moulded Diaphragms and for fabrication of expansion bellows and inflatable seals. Typical roll size is 50mtr x 1.66mtr wide.
|
|