NBR Matting

C478 Anti-Vibration Mats are Nitrile Rubber bespoke compound pads designed to isolate vibration.  The 5mm Ribs run opposite to each other on both sides of the pad to ensure good grip and anti-vibration properties.

LockSafe is a completely new concept in modular anti-fatigue rubber safety matting. Quick to assemble and install with easily connected ramps and corners to fit any configuration.

Designed with a unique positive, male and female, locking concept that ensures the individual mats wont come apart unless you want them too, which also allows you to lift and roll the matting as a single piece.

Manufactured as a solid top or open tile for drainage, the tiles are manufactured in a standard Grease Resistant rubber or Nitrile (for oil resistance) and can be supplied with a high traction surface cotaing for maximum slip prevention.  

Solid Top Antifatigue Matting provides comfort and fatigue relief for standing workers over extended periods of time in industrial and commercial environments.  The synthetic rubber mat is designed to be easily connectable through hidden inbuilt plugs and can be fitted with removable high visibility yellow edge ramps.   The material is Oil and Grease resistant and will absorb impacts from heavy objects.

Ideal for use as a anti fatigue mat in packaging and work areas or on larger floors such as gyms.

Supplied in 910mm x 910mm sheets at 17mm Thick the mat is easy to lay, uplift and move or replace as required. 

MacMat Oil is a specially formulated Nitrile material that has excellent resistance to animal or vegetable oils and fats up to 50 Deg C, and non-aromatic hydrocarbons.

As well as thermal and acoustic insulation, this matting is a anti-static, providing additional safety in high risk areas.  

Available with Circular Stud or Checker Plate surface pattern.

A high performance low compressible medium density nitrile bonded cork for noise and vibration control, with excellent oil and fuel resistance.

Suitable for a wide range of applications including Vibration control in technical equipment rooms, Vibration isolation for machinery including Pumps, Presses, Looms & Motors, Runways, rail & subway isolation pads. Building acoustic suspension elements & systems for walls, Ceilings, Pipings etc.

MacLellan Rubber Cork Rubber Mounting Pads are one of a
portfolio of solutions for noise and vibration reduction in
applications where bolting needs to be avoided. The Cork Rubber Pad is designed to eliminate structure born
vibration and noise, and has opposing ribbed pads on both
sides for isolation and positive grip.

Available in sheets 18” (457mm) square by 22mm thick, that
are easily cut to size on site.

With a working range of 15 to 75 psi, the maximum load per
standard sheet is 4,860 (2,200) – 24,300 ( 11,045) lbs (kg) .

Recommended for pumps, chillers, machine shop equipment,
compressors etc

MacLellan Rubber Foam Rubber Mounting Pads are one of a
portfolio of solutions for noise and vibration reduction in
applications where bolting needs to be avoided.
The EVA Foam Rubber Pad is designed to eliminate
structure born vibration and noise, and has opposing ribbed
pads on both sides for isolation and positive grip.

Available in sheets 18” (457mm) square by 22mm thick,
which are easily cut to size on site.

With a working range of 4 to 20 psi, the maximum load per
standard sheet is 648 (295) – 6,480 (2,945) lbs (kg) .
Recommended for HVAC, motors, pumps, chillers, air
conditioning units, generators etc.

MacLellan Rubber general purpose Waffle Rubber Mounting
Pads are one of a portfolio of solutions for noise and vibration
reduction in applications where bolting needs to be avoided.
The Waffle Pad has a cup design on both sides that creates a
suction effect on the mating surfaces to provide positive grip,
isolating the equipment and stopping movement.
The 2” (50mm) squares are separated by a thin web of
material that is easily cut to size on site.

Available in sheets 18” (457mm) square and thicknesses of
8, 9.5, 12 and 19mm thick, and a range of hardnesses for
optimum isolation.
Maximum load capacity of 150 psi and 20% deflection at
Maximum Load.

Recommended for pumps, chillers, machine shop equipment,
and electrical transformers